Rubber O Rings: An O - Ring is a circular band with circular cross section to arrest leakages between two faces or over shaft and hole. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface. O–Rings selection is based on chemical compatibility, service temperature, sealing pressure, lubrication requirements and working atmosphere. Successful o-ring joint design requires a rigid mechanical mounting that applies a predictable deformation to the o-ring. This introduces a calculated mechanical stress at the o-ring contacting surfaces. As long as the pressure of the fluid being contained does not exceed the contact stress of the o-ring, leaking cannot occur. The seal is designed to have a point contact between the o-ring and sealing faces. This allows a high local stress, able to contain high pressure, without exceeding the yield stress of the o-ring body. The flexible nature of o-ring accommodates imperfections in the mounting parts. Mostly these O Rings are used to seal hydraulic, pneumatic and wherever sealing is required. We manufacture O-rings, seals and associated components from a wide range of materials, with the shortest lead-times in India. When mismatching the sealing line and parting line, the sealing performance is improved due to the flash marks. Because there is a mechanical removal of flash is taken place in the sealing line. The offset parting o-rings is widely used in critical applications. These o-rings are costlier than regular O-rings, because of their construction. Our continual investment and development of product, personnel and customer satisfaction ensures we remain unrivalled in our field for quality and service. O-Rings are also manufactured from over 15 polymers including: Nitrile / Buna-N (NBR), Fluorocarbon (Viton®, Fluorocarbon (FKM), Silicone (VMQ), Fluorosilicone (FVMQ), Polyurethane (AU/EU), Natural Rubber (NR), Ethylene Propylene (EPDM), Hydrogenated Nitrile Rubber (HNBR), Styrene Butadiene Rubber (SBR), Chloroprene (Neoprene®), etc.
This is your website preview.
Currently it only shows your basic business info. Start adding relevant business details such as description, images and products or services to gain your customers attention by using Boost 360 android app / iOS App / web portal.
2017-08-21T03:21:21
Rubber O Rings: An O - Ring is a circular band with circular cross section to arrest leakages between two faces or over shaft and hole. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface. O–Rings selection is based on chemical compatibility, service temperature, sealing pressure, lubrication requirements and working atmosphere. Successful o-ring joint design requires a rigid mechanical mounting that applies a predictable deformation to the o-ring. This introduces a calculated mechanical stress at the o-ring contacting surfaces. As long as the pressure of the fluid being contained does not exceed the contact stress of the o-ring, leaking cannot occur. The seal is designed to have a point contact between the o-ring and sealing faces. This allows a high local stress, able to contain high pressure, without exceeding the yield stress of the o-ring body. The flexible nature of o-ring accommodates imperfections in the mounting parts. Mostly these O Rings are used to seal hydraulic, pneumatic and wherever sealing is required. We manufacture O-rings, seals and associated components from a wide range of materials, with the shortest lead-times in India. When mismatching the sealing line and parting line, the sealing performance is improved due to the flash marks. Because there is a mechanical removal of flash is taken place in the sealing line. The offset parting o-rings is widely used in critical applications. These o-rings are costlier than regular O-rings, because of their construction. Our continual investment and development of product, personnel and customer satisfaction ensures we remain unrivalled in our field for quality and service. O-Rings are also manufactured from over 15 polymers including: Nitrile / Buna-N (NBR), Fluorocarbon (Viton®, Fluorocarbon (FKM), Silicone (VMQ), Fluorosilicone (FVMQ), Polyurethane (AU/EU), Natural Rubber (NR), Ethylene Propylene (EPDM), Hydrogenated Nitrile Rubber (HNBR), Styrene Butadiene Rubber (SBR), Chloroprene (Neoprene®), etc.
2017-08-21T03:21:21
Share it on
Keywords
- NR
- NBR
- SBR
- FKM
- line
- hole
- seal
- EPDM
- yield
- faces
- parts
- shaft
- design
- groove
- leakages
- assembly
- interface
- wide range
- o ring body
- flash marks
- Fluorocarbon
- high pressure
- circular band
- point contact
- contact stress
- Natural Rubber
- Rubber O Rings
- parting o rings
- flexible nature
- regular O rings
- o ring contacting
- O Rings selection
- high local stress
- mechanical removal
- Ethylene Propylene
- shortest lead times
- service temperature
- continual investment
- associated components
- customer satisfaction
- critical applications
- chemical compatibility
- circular cross section
- predictable deformation
- lubrication requirements
- Styrene Butadiene Rubber
- rigid mechanical mounting
- Hydrogenated Nitrile Rubber
- calculated mechanical stress
- o ring accommodates imperfections
Submit Your Enquiry